Model: MSP – 25

Function:This machine is MSP 9000C system with special optical surface processor, single disk table structure.Liaoning xiang shun technology co., LTD. Independent research and development, exclusive patent technology.Adopt the PLC control system imported from Japan, after a large number of experimental optimized parameters, can prepare 6 qualified samples in about 2 minutes.The grinding process can be automatically timed, quantitative spray and polishing agent, automatically switch the size and flow rate, accurate control, to achieve the maximum possible saving polishing agent and other consumables consumption.With the use of liaoning xiangshun patent technology of the light plate blower, the prepared coal and rock light plate can be guaranteed without any stain residue, no scratch, the upper and lower sides are completely parallel, the effect is close to perfect level, no experienced personnel can start, easy to achieve automatic detection of the polishing requirements of the surface of the light plate.

Technical advantages:

1. Fast speed: 6 qualified samples can be prepared in about 2min (including all the two steps of pre-grinding and polishing);

2. Save polishing agent and other consumables: about 3ml/sample;

3, inexperienced personnel can operate;

4, Japan imported PLC control system, reliable performance, good quality;

5. Free switching of seven working modes: pre-grinding (coal), pre-grinding (coke), polishing (coal), polishing (coke), manual (grinding), manual (throwing), automatic flushing, etc.LCD touch screen control and display;

Technical parameters:

Working modes: pre-grinding (coal), pre-grinding (coke), manual grinding, polishing (coal), polishing (coke), manual throwing, automatic flushing, etc.LCD touch screen control and display;

Number of light plates processed at the same time: 6 samples/time;Pre-grinding speed: 6 samples /30 seconds (each time)Polishing speed: 6 samples /30 seconds (each time)Polishing agent consumption: 3ML/ sample;

Inner hole diameter: 25MM

Working voltage: 220V 50HZ 370W

Power: 370 w

Diameter of chassis: 203mm

Chassis speed: 450-600 (r/min)

Speed of optical manipulator: 50r/min

Force applied to each sample: 0-40N

Overall dimension: 700×600×280mm