How does the digital coal and rock analysis maintain the equipment of coal and rock analysis

One: The size of the test bed.The size of the test bed should be built according to the style of the test equipment. A reasonable structure can greatly improve the work efficiency and reduce the fatigue degree.If conditions permit, you can buy a professional test bed.

Two: LocationIn general, our test bed is not allowed to be built in a place where direct sunlight and air convection are available.Because strong light exposure will make the temperature measurement inaccurate, and shorten the service life of electronic components.Air convection will also make the temperature and humidity lost, dust sample even floating.Result in deviation of test results.

Three: The temperatureDomestic latitude and longitude deviation is very large, there are very few areas during the day there is also a great temperature difference, in the absence of indoor constant temperature and humidity equipment, should try to manually adjust the test temperature, so as to avoid adverse effects on the instrument.

Four:Basic facilities

1. Grounding.Coal quality analysis equipment must be grounded wire, pay attention to the use of safety, lest the instrument leakage or voltage instability causes damage to the instrument or even laboratory staff injured.

2. Power off protection device.The same is for the safety point of view, is one of the test bed necessary facilities.

3. Power supply.Should choose sufficient and high quality power supply.

4. UBS.Some tests are extremely long and complex to prepare.Often a sudden power failure will cause the work can not be completed, there is a good backup power supply to complete the work on time.

5. Test water.The pool should be far enough away from the electronic equipment and not leak.

6. Routine maintenance.Cleaning, drying, good insulation performance is the goal of daily maintenance.Maintaining the test bed as part of your daily work schedule will only make your work more efficient.